Hydra-Tech S4VHL 4" Hydraulic Submersible Sludge/Slurry Pump


Hydra-Tech S4VHL 4" Hydraulic Submersible Sludge/Slurry Pump The S4VHL - 4" Hydraulic Submersible Sludge/Slurry Pump is designed to handle wastewater and sewage and will fit through a 20" diameter manhole. Primary uses for this pump are: Sewer by-pass into force mains and general transfer of solids laden fluids. This versatile pump is offered in aluminum or ductile iron construction.

Quick Specs

  • Discharge Size: 4 Inch

  • Solids Handling: 3 Inch (80 mm)

  • Maximum Flow: 750 GPM (2850 LPM)

  • Maximum Head: 210 Feet (64 M)

  • Hydraulic Input: 25 GPM (95 LPM) Max.

  • Hydraulic Pressure: 3000 PSI (204 Bar) Max.

  • Weight: 160 Lbs.(72 Kg)

Features

  • Small Overall Size allows pump to fit through a 20" diameter opening

  • Oil Lubricated Seals (can run dry)

  • Variable Speed hydraulic drive

  • Fully Recessed Vortex Impeller (will pass 3" semi-solids)

  • Can be bolted directly into a pipeline or fitted with a suction hose for underwater dredging

  • Safe Hydraulic Drive can be used where electric power is hazardous or impractical

  • Dependable gear type hydraulic motor

  • Operates with our HT25 to HT60 power units or other hydraulic power sources capable of flows of 14 - 26 GPM

Specifications

WEIGHT: (Aluminum) 160 lbs. (72kg)
(Ductile Iron) 295 lbs. (134 kg)
HEIGHT: 33" (84 cm)
WIDTH(@ widest point): 19 3/4" (50 cm)
DISCHARGE: ", NPT(F)
INLET FLANGE: 4", 125# ASA
SOLIDS HANDLING: 3" (8 cm)
HOSE PORTS: 1" (-16) SAE
PUMP BODY: (S4VHL) Heat Treated Aluminum
(S4VHLDI) Ductile Iron
IMPELLER: Stainless Steel
WEAR RING and WEAR PLATE, Stainless Steel
SHAFT: Stainless Steel
SHAFT SEAL: Carbon/Ceramic (Std)
Silicon Carbide (Optional)
ELASTOMERS: Buna N (Std)
HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW: Max 26 GPM (98 LPM)
OPERATING PRESSURE: Max 3000 PSI (204 Bar)
POWER SOURCE: Any Open Center Hydraulic System

Recommended Power Units: HT35DD, HT60DCV

S4VHL Hydraulic Submersible Sludge/Slurry Pump Specifications


York Fluid Controls Limited, York, Fluid, Controls, Limited


Liquid Handling Equipment Specialists Since 1960

About Us

Established in 1960, York Fluid Controls Limited is a leading stocking distributor of fluid transfer and process pumps, positive displacement and centrifugal pumps, liquid filtration, valves, mixers and tanks. York offers an extensive range of services, including a complete repair and test centre, an engineering department, custom fabrication, and a machine and assembly shop. York serves organizations of all sizes and from all industries, throughout Canada. Reliability, service excellence, a desire to solve customers' problems and the highest ethical standards underpin this family-owned company and all that it does. Learn More

Sitemap

Our Products

York Fluid Controls has a wide variety of products for industry. Filtration Solutions, Industrial Mixers, Industrial Pumps, Industrial Valves, Power Units, Pulsation Dampeners, Sanitary Equipment, Sealing Products and Tank Container Systems from the world"s leading manufacturers

Website Content

York Fluid Controls Limited provides an indepth Directory of Industrial Pumps by both Pump Manufacturer and by Pump Type. We provide an Industrial Valve Directory of manufacturers and representatives. We offer a wide variety of products to meet your unique needs.

Get in Touch