High Pressure Pumps, Fire Pumps, Engine Driven Pumps from York Fluid Controls

High Pressure Pumps, Fire Pumps, Engine Driven, Pumps, York Fluid Controls
High Pressure Pumps, Fire Pumps, Engine Driven, Pumps, York Fluid Controls
2" High
Pressure Pumps

These Pumps are capable of developing 75 lbs. of pressure at 30 GPM: use for fire protection or irrigation. Available with a wide choice of standard and heavy-duty engines for gasoline and diesel fuels.

Unit is standard with die-cast aluminum housing and impeller or Cast-Iron, G-Ruff Coat Teflon®* housing with bronze impeller. All models standard with EPDM elastomers, Viton® fitted silicon-carbide self-lubricated seal.

  • Die Cast Aluminum
  • Cast Iron
High Pressure Pumps, Fire Pumps, Engine Driven, Pumps, York Fluid Controls
High Pressure Pumps, Fire Pumps, Engine Driven, Pumps, York Fluid Controls
1- 1/2" High
Pressure Pumps

The AMT line of Engine Driven High Pressure pumps is designed for lawn sprinkling, agricultural spraying, dewatering, fire fighting, emergency water supply and pressure boosting. Single stage models feature replaceable Cast Iron dual volutes and semi-open impellers that can handle 1/8" diameter solids.

Two-stage models feature Cast Iron diffusers and Stainless Steel closed impellers for high efficiency producing up to 103 PSI that generally requires 8 horsepower or more from a single stage pump.

AMT Engine Driven High Pressure pumps are reliable, cost effective and low maintenance. Many are readily available "Off-the-Shelf" for fast 24 hour shipment. For use with non-flammable liquids which are compatible with pump component materials.
  • Cast Iron
  • Cast Aluminum
High Pressure Pumps, Fire Pumps, Engine Driven, Pumps, York Fluid Controls
High Pressure Pumps, Fire Pumps, Engine Driven, Pumps, York Fluid Controls
2-1/2"x1-1/2" or
2-1/2"x2-1/2"
Fire Pumps

The Gorman-Rupp line of Engine Driven High Pressure fire pumps deliver up to 156 PSI and 260 gallons per minute of flow.

They are equipped with an exhaust primer and can handle solids up to 5/16" diameter. All units have a built-in check valve and include a discharge pressure gauge , brass hose adapters - NPT to National Fire HoseThreads,
and a suction strainer. Pump suction and discharge threads are NPT .

A portable 6.5 gallon fuel tank with a 6 foot fuel line and primer bulb is standard with 62 1/2D1-CH23 S/G. 13 HP or 23 HP Kohler engines are standard.
  • Aluminum
High Pressure Pumps, Fire Pumps, Engine Driven, Pumps, York Fluid Controls
High Pressure Pumps, Fire Pumps, Engine Driven, Pumps, York Fluid Controls
1-1/2" - 3"
General Purpose, High Pressure and Trash Pedestal Drive Pumps

Pedestal drive units for flex-coupling to an electric motor are available in general purpose, high pressure and trash versions. Die-cast aluminum or cast iron (G-Ruff Coat Teflon®*). All models standard with threaded impeller.

*Teflon® is a registered trademark of Dupont
  • Die Cast Aluminum
  • Cast Iron
High Pressure Pumps, Fire Pumps, Engine Driven, Pumps, York Fluid Controls
High Pressure Pumps, Fire Pumps, Engine Driven, Pumps, York Fluid Controls
1-1/2" - 3" Self-Priming
Solids Handling
Pedestal Pumps

AMT Self-Priming Solids Handling Pedestal pumps are designed for direct or belt drive. The units feature 3/8" to 1-1/2" solids handling construction and are fitted with a Cast Iron bearing housing which contains two or three precision sealed ball bearings depending on specific model.

Easy cleanout design by removing casing bolts, permits removal of debris without disconnecting hoses. The 3" Trash pump models feature cleanout covers with quick release handles for removal of debris. AMT Self-Priming Solids Handling Pedestal pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.
  • Cast Aluminum
  • Cast Iron
  • Polypropylene
     

 

 

Site Design - Panther Marketing & Design
Back to Top