Liquid Saver Pump Flux F425
No loss of liquid due to integrated backflow stop.-
For thin neutral corrosive and flammable liquids.
-
Pump tubesets in stainless steel (S) or in polypropylene (P).
-
Stainless steel (S) version submitted for use in Zone "O" temperature class T4.
-
Delivery rate up to 26 GPM.
-
Liquid remaining in drum is less than 3 oz. when drum is tilted.
-
No more environmental contamination, easy to service.
-
An easy to operate and handy pump
OPERATION AND FUNCTION OF FLUX PUMP TUBESET F425.
When emptying a drum or container, the liquid which remains in the pump tubeset or hose should NOT be allowed to flow back into the drum or container, but remain under the control of the operator. Therefore, the pump tubeset--model F425-- is equipped with an integrated back-flow stop in the lower part of the pump housing, which is operated manually by turning an adjustable lever 90 degrees to a locked position. As soon as the drum or container is completely empty and no more liquid is being discharged, the integrated back-flow stop MUST be closed with the motor still running. In that way, any back-flow of the liquid is prevented and ensures that the drum or container is emptied to its maximum.
ADVANTAGES of Flux pump tubeset F425.When emptying a drum or container, the liquid which remains in the pump tubeset or hose should NOT be allowed to flow back into the drum or container, but remain under the control of the operator. Therefore, the pump tubeset--model F425-- is equipped with an integrated back-flow stop in the lower part of the pump housing, which is operated manually by turning an adjustable lever 90 degrees to a locked position. As soon as the drum or container is completely empty and no more liquid is being discharged, the integrated back-flow stop MUST be closed with the motor still running. In that way, any back-flow of the liquid is prevented and ensures that the drum or container is emptied to its maximum.
- Drums and containers can be emptied in vertical position up to one (1) pint and in tilted position up to 3 oz. residual quantity.
- By closing the back-flow stop at the bottom of the tubeset, the liquid in the pump and transfer hose cannot flow back into the drum or container.
- When the union nut on the lower side of the motor is unscrewed, the motor can be removed, then the inner tube can be pulled out of the outer tube.
- Pump tubeset F425 S in stainless steel has an outer diameter of ony 1 19/32" over the total effective immersion length. F425 P outer diameter is 2".
- Best economy of operation due to high efficiency of pump.
- No loss of liquid or environmental problems with remaining liquid in drums and containers. No contamination of environment due to leaking liquid.
- Easy to operate, easy to dismantle and service with cleaning a simple operation.
 |